It is currently Tue Sep 07, 2010 8:57 pm

All times are UTC - 7 hours [ DST ]




 Page 1 of 1 [ 9 posts ] 
Author Message
 Post subject: Amp took a shit on me.
PostPosted: Thu Feb 11, 2010 3:48 pm 
User avatar

Joined: Sat Jul 25, 2009 4:35 pm
Posts: 694
Location: Washington Court House, Ohio
Well, sadly my HT Amp took a shit on me today and stopped working. :cry: Now I'm going to have to try and fix it myself, send it out to be repaired, or chuck it in the trashcan. :cry: I may just buy a car amp and a Computer Power Supply for now to use then later I can put it in my car. So, what do you guys think I should do, I'm trying to go the cheapest route with this.

:x No more bass for awhile for me :x



_________________
Image
Pete Kulicki wrote:
Building a stereo just to measure it's sound pressure level is like building a microwave oven for no reason other than to measure it's electromagnetic radiation emissions.
Online
 Profile  
 
 Post subject: Re: Amp took a shit on me.
PostPosted: Fri Feb 12, 2010 9:28 am 
User avatar

Joined: Sat Jul 25, 2009 4:35 pm
Posts: 694
Location: Washington Court House, Ohio
Bump

















IMPORTANT



_________________
Image
Pete Kulicki wrote:
Building a stereo just to measure it's sound pressure level is like building a microwave oven for no reason other than to measure it's electromagnetic radiation emissions.
Online
 Profile  
 
 Post subject: Re: Amp took a shit on me.
PostPosted: Tue Feb 16, 2010 10:32 am 
User avatar

Joined: Sat Jul 25, 2009 4:35 pm
Posts: 694
Location: Washington Court House, Ohio
Some Pictures Of The Dead Receiver... :(

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image



_________________
Image
Pete Kulicki wrote:
Building a stereo just to measure it's sound pressure level is like building a microwave oven for no reason other than to measure it's electromagnetic radiation emissions.
Online
 Profile  
 
 Post subject: Re: Amp took a shit on me.
PostPosted: Tue Feb 16, 2010 9:29 pm 

Joined: Mon Oct 06, 2008 9:18 pm
Posts: 308
Location: Illinois
You were using this receiver to run a 2 ohm load and subs to boot???



_________________
Alpine 9884
Alpine RUX C701
Alpine H701
BG Neo 3 planar tweeters
Dayton RS225 *" midbass
BG Neo 8 planar midranges
Diamond 400.4 on mids and highs
Cadence TXA 3002 on Midbass

Sundown SAZ1500D

TC Sounds TC3000 15DVC
Offline
 Profile  
 
 Post subject: Re: Amp took a shit on me.
PostPosted: Wed Feb 17, 2010 8:11 am 

Joined: Wed Aug 06, 2008 8:17 pm
Posts: 732
cubdenno wrote:
You were using this receiver to run a 2 ohm load and subs to boot???

i too am confused


Offline
 Profile  
 
 Post subject: Re: Amp took a shit on me.
PostPosted: Wed Feb 17, 2010 9:37 am 
User avatar

Joined: Sat Jul 25, 2009 4:35 pm
Posts: 694
Location: Washington Court House, Ohio
cubdenno wrote:
You were using this receiver to run a 2 ohm load and subs to boot???

Yeah, i had them wired together to 8 Ohms (Two Single 4 Ohm Voice Coils Wired Down To 8 Ohms) But it was a trooper, I had nothing else to run my subwoofers on, and it was a 5.1 :lol: . It ran its heart out for 13 years (+/-)

At one time i was running 1 8" Kenwood (STOCK SUBWOOFER [8 Ohms]), two JVC 8"s Subwoofers (FROM A JVC STEREO[8 Ohms]),and two Orion Cobalt 10"s (MY CURRENT SUBWOOFERS[4 Ohms]) :lol: :lol: :lol: :lol: :lol: So yeah my receiver was taking alot of shit over the years :D Its offical name is THE TROOPER

It was basicly a 2. 5 (Runing just stereo mids and five subwoofers) I clearly knew I was abusing the receiver, just realy didn't care till now that I have PWK Blueprints for my 10"s. :evil:



_________________
Image
Pete Kulicki wrote:
Building a stereo just to measure it's sound pressure level is like building a microwave oven for no reason other than to measure it's electromagnetic radiation emissions.
Online
 Profile  
 
 Post subject: Re: Amp took a shit on me.
PostPosted: Tue Apr 20, 2010 8:20 pm 
User avatar

Joined: Sat Jul 25, 2009 4:35 pm
Posts: 694
Location: Washington Court House, Ohio
-_-$1o-_- wrote:
cubdenno wrote:
You were using this receiver to run a 2 ohm load and subs to boot???

Yeah, i had them wired together to 8 Ohms (Two Single 4 Ohm Voice Coils Wired Down To 8 Ohms) But it was a trooper, I had nothing else to run my subwoofers on, and it was a 5.1 :lol: . It ran its heart out for 13 years (+/-)

At one time i was running 1 8" Kenwood (STOCK SUBWOOFER [8 Ohms]), two JVC 8"s Subwoofers (FROM A JVC STEREO[8 Ohms]),and two Orion Cobalt 10"s (MY CURRENT SUBWOOFERS[4 Ohms]) :lol: :lol: :lol: :lol: :lol: So yeah my receiver was taking alot of shit over the years :D Its offical name is THE TROOPER

It was basicly a 2. 5 (Runing just stereo mids and five subwoofers) I clearly knew I was abusing the receiver, just realy didn't care till now that I have PWK Blueprints for my 10"s. :evil:


I may rebuild The Trooper to play the DD's.
:twisted:
I am buying a BASH 500watt Plate Amp from Parts Express to power my two tens. 8-)



_________________
Image
Pete Kulicki wrote:
Building a stereo just to measure it's sound pressure level is like building a microwave oven for no reason other than to measure it's electromagnetic radiation emissions.
Online
 Profile  
 
 Post subject: Re: Amp took a shit on me.
PostPosted: Sun Apr 25, 2010 10:53 am 
User avatar

Joined: Sat Jul 25, 2009 4:35 pm
Posts: 694
Location: Washington Court House, Ohio
After 3 months, $278.60, I finaly have my BASH 500watt at 4 Ohm Plate Amp for my two Orion 10" Cobalts, All I hav left to do it to build my PWK Design...



_________________
Image
Pete Kulicki wrote:
Building a stereo just to measure it's sound pressure level is like building a microwave oven for no reason other than to measure it's electromagnetic radiation emissions.
Online
 Profile  
 
 Post subject: Re: Amp took a shit on me.
PostPosted: Fri Jul 09, 2010 6:17 pm 
User avatar

Joined: Sat Jul 25, 2009 4:35 pm
Posts: 694
Location: Washington Court House, Ohio
Well guys, I contacted Kenwood to see if there is any way to get this thing fixed so I can run some mids/highs for my HT.



_________________
Image
Pete Kulicki wrote:
Building a stereo just to measure it's sound pressure level is like building a microwave oven for no reason other than to measure it's electromagnetic radiation emissions.
Online
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 9 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

phpBB skin developed by: John Olson
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group